Working Processes: Finishing the Cutscene - Adding more items and adjusting the line size

As I had not yet finished tracing the Google Sketchup screen capture I made, I thought it would be best to first finish this before I proceed to adding more code/camera angles/colours.

I first finished off the coat hanger by adding its branches, drew the monitor, lamp and paper.

I then changed the line thickness from 2 to 1. It was originally set to 2 so that the lines would be clearer and more noticeable to see when tracing around my panoramic crafted picture.

I noticed that due to the way I had laid out the pictures on top of each other to make a panoramic view, the prospective was not perfect, which left the picture frames looking too straight when compared to the angles of the walls. With this, I selected all the picture frames and used the disort tool, dragging the corners on the left higher. I also applied this method to the door which seemed too straight.

I proceeded to extend the lines of the door and coat hanger to further down the bottom so that the bottom lines were all level with each other. I then traced around the vending machine on the right to complete the look. All that is left now is to colour it in.

Before

After

When looking at the after, I feel as though this definitely looks better than the before. This is mainly due to the line thickness as more detail is shown. Something of which is noticeable is that the top of the picture frames are still not parallel to the wall. I made sure that this wasn't the case because as the wall goes down, the less angled it becomes.